Working on Your Haines City Parking Lot Paving in the Cold

It might be hard to believe, but the installation process of your Haines City parking lot paving is one that is at the mercy of a lot of things that might cause it to go wrong. The entire process is comprised of a number of different factors and calculations to make sure that the installation goes as expected, and that the pavement withstands the loads it’s expected to.

If anything goes wrong in any of the steps of the pavement installation process, then you will end up with pavement that does not hold up as expected, and will eventually cost the owner thousands in just repairs alone. In the end, if you end up with improperly installed pavement, the best course of action might as well be to tear it up and have it re-installed.

The types of damage that you see in improperly installed pavement goes all the way down into the foundation, and simple surface repairs like crack filling and sealing won’t fix it. One of the factors that significantly influence the installation of your pavement is temperature.

The temperature of your compaction equipment, the materials used, and even the climate temperature must be carefully measured to make sure that the installation goes off without a hitch. But what happens if you install your pavement in colder temperatures? Read on to find out.

Can you work on your paving in the cold?

Technically, it is possible to work on asphalt pavement during colder weather conditions, but it’s a bit of a tight fit making sure that the installation goes as intended.

While installing asphalt pavement doesn’t take up too much time, you have to remember that all of the factors that go into asphalt paving work are carefully temperature controlled to make sure that the installation and repair work is a success.

This means that the curing and processing temperature have to be maintained at a certain temperature.


When it comes to installing asphalt pavement in a colder climate, the paving company has to make sure that the pavement reaches a temperature of at least 50 degrees Farenheit before they can begin the process of asphalt installation.


In addition to the need of a carefully maintained temperature for pavement installation, the humidity of the area must also be taken into account. By that, we mean that there should be no humidity at al present. As much as possible, your Haines City parking lot paving should be installed on a warm and dry day to make sure that its installation is a success.

Tags: , , , ,