Asphalt is a durable and easy-to-maintain material that lasts long even in high-traffic areas. When done right, this can provide your property with all of the benefits that come with a high-quality asphalt parking lot. However, for many property owners, the process of having an asphalt pavement installed is a fascinating one. Here is a general overview of how an asphalt Plant City parking lot paving is installed.
First stage: Demolition and roughing
The first stage of paving a new asphalt parking lot involves the demolition of the existing surface, followed by preliminary roughing. This involves removing any loose particles and grading the surface to ensure consistent smooth surfaces.
A stable substrate is essential for the longevity of the asphalt material. Professional contractors know how to achieve the right stable base for pavement installations. According to industry standards, the base should have a thickness between 6 millimeters and 15 millimeters.
To begin the demolition process, heavy machinery is used to remove chunks of pavement. This is followed by the use of picks and chisels to break through any concrete bases that remain. A pneumatic hammer helps to make quick work of this final demolition stage.
Advanced technology makes relatively quick work of the roughing stage as well. Hydraulic hammer trucks carry about 15 tons of weight. The trucks pulverize the pavement through the use of its spinning disc, which has nine steel shards on it.
Once the pavement has been completely removed, it is time to begin the pavement installation.
A parking lot pavement is laid out in rows. A row is a path that vehicles take when driving into a parking space or when exiting the parking lot. The first row is typically staggered off from the side boundaries by 4 feet. This ensures that cars do not obstruct the sidewalk while waiting to enter or exit a parking space.
The first step in laying down the first row is stretching out and leveling the asphalt material. Asphalt is a material that has been heated and rolled into sheets. These sheets are known as sheets. Sheets are typically made in sizes of around 20 feet by 150 feet.
The material may be black, brown, red, or green, depending on the material and its grade. Green is of the highest quality and is primarily used in high-traffic commercial parking lot areas. Brown and red are lower grade materials, mostly used for low-traffic residential driveways.
Once the rows have been laid down, the asphalt is left to cure.
How New Asphalt Plant City Parking Lot Paving Looks After Installation
When new asphalt parking lot paving is installed, the surface is left bare. Markings are then put down to indicate where parking spaces are to be created. Nowadays, painted lines are used. Before painted lines were invented, white oil was used to mark the spaces.