There are plenty of procedures that can be used for your Lakeland parking lot paving to help keep it in great condition. These are all important so that your pavement can be kept in great condition.
However, many of these processes only confuse clients, which leads to a lot of miscommunication between the client and the pavement contractor. One important process that your pavement may need eventually is a parking lot paving overlay.
This is also one of the most commonly misunderstood Lakeland parking lot paving maintenance processes. To help you with this, here are some commonly asked questions about the Lakeland parking lot paving overlay process that we’ve addressed for you.
What is an asphalt overlay?
An asphalt overlay is a patch job that is performed by applying a new layer of asphalt over the existing surface of your pavement. Instead of tearing up the old asphalt and replacing it, an asphalt overlay relies on the existing layers as a base for the new overlay. This is usually performed when there are signs of damage on the pavement that are bad enough to need repairs, but not serious enough to need a complete replacement.
Why is this needed?
Now that you know what this is, you might be wondering why this is even needed in the first place. An asphalt overlay is used for pavements that have signs of damage like potholes and fatigue cracks since this helps fix these issues. It can also be used to provide additional strength and support to the existing pavement to help it bear heavier loads and help make the surface smooth again.
How long does this last?
While an asphalt overlay is not meant to replace your parking lot paving maintenance, it can help extend the lifespan of your Lakeland parking lot paving by about 15 years, especially if you combine it with proper care and maintenance.
How is this applied?
Before an asphalt overlay is installed, it first needs to be inspected for suitability. If there is extensive structural damage to your pavement, then an overlay is not suitable for it.
If it passes the assessment, then you can move on to the next stage, which is the milling of the asphalt, where the top layer of the asphalt is ground up to make it level and take care of any cracks and damage on the surface. The base will then be repaired to make sure that it is sturdy enough to handle the overlay. Finally, the overlay is installed on top to finish the process.