There are plenty of maintenance and repair processes involved in keeping a Plant City parking lot paving in good working condition. From simple cleaning to pothole repairs, it’s important to be aware of the services that are needed to keep your pavement in good condition.
One important service is pavement resurfacing. Like the name suggests, pavement resurfacing is done to resurface your pavement. However, this should only be done when the condition of your parking lot calls for it.
To help you decide whether or not your Plant City parking lot paving needs resurfacing, here are some clear signs to look out for.
Cracking is to be expected with any kind of pavement, as your parking lot is designed to handle all kinds of traffic loads. With a regular maintenance plan, all you have to do is patch them up and keep up with your pavement care.
However, if you find that the cracks are much larger than usual and no longer benefit from your usual repairs, then this is a sign that your pavement needs to be resurfaced.
Potholes happen when water gets into your pavement and continues to freeze and melt due to fluctuating temperature cycles. Over time, the expand and contrast action of the water causes the internals of the pavement to weaken and eventually break down, forming a depression on the surface known as a pothole.
While one or two potholes are easily handled, if there are plenty of potholes forming on the surface of your pavement, then it may be easier and less costly to simply resurface your pavement to handle it.
Pooling Water in your Plant City parking lot paving
Standing water is one of the most common causes of damage to your pavement. When left unattended, pooling water can cause all kinds of damage to your pavement which can be very costly to repair.
Because of the importance of keeping water off of your pavement surface, your Plant City parking lot paving is fully designed to keep water away. Because of this, if you see signs of pooling water on your pavement, then this is a sign that there is a serious issue with your pavement surface, which may need resurfacing to address.
Your parking lot is meant to be designed with a specific traffic load in mind, which is why you need to inform your paving contractor about the expected traffic load so that they can design your parking lot’s thickness to accommodate that load.
Warping happens when your pavement’s surface is taking on too much pressure, causing the surface to become uneven. If this happens, then your pavement needs to be resurfaced.