A Haines City parking lot paving is a structure that is as sturdy as they come. These pavings are expected to last up to twenty-five years, just for one installation. However, this kind of lifespan can only be achieved as long as the right amount of care and maintenance is done on it.
On average, significant signs of damage can be detected on your parking lot after about ten years. This means significant forms of cracking, and serious pavement fading. However, because of the constant amount of traffic that your paving is expected to take on, you will find that there will be a few small signs of damage.
These small signs of damage are nothing that you have to worry about. As long as you administer the right kind of treatment and catch all signs of damage as soon as possible, then your Haines City parking lot paving will last as long as you need it to. One of the best ways to maintain the health of your paving is by applying a regular schedule of sealant on your pavement.
This sealcoating can protect your paving from the natural elements, seal cracks, and provide other additional benefits to your parking lot. Here are some basic tips that you can keep in mind when applying sealant to your pavement.
Wear the right gear
While the sealant used on your paving looks like your run-of-the-mill paint, it is a lot more hazardous than that. Paving sealant is a very harsh chemical that can really hurt you if it comes in contact with your skin.
Always remember to wear the right gear and clothing that can completely cover you. Wear gloves to make sure that you don’t handle the sealant with bare skin. In addition to this, make sure that you wear a mask in order to avoid breathing in the fumes that the sealant will give off. These fumes can be dangerous if you breathe in too much of this.
Don’t rush the project
While you may be excited to have a great looking, sealcoated, Haines City parking lot paving, don’t rush the sealant application procedure. Some people get too excited and start pouring the sealant all over the paving to get the job done faster. Take it one area at a time, otherwise you might end up with a very uneven coat.
Make sure you have enough sun to apply and dry your sealant
As much as possible, you want to carry out the sealant procedure during the summer months. In order for the sealcoating to be effective, it must be properly dried in order for it to seal properly. You have to give the paving at least 24 hours to dry properly before you have any traffic on it.
Make sure it’s clean
Before performing the sealant onto your Haines City parking lot paving, make sure that your parking lot is cleaned completely of any debris and other dirt. Sweep away any signs of dirt, and wash off the surface of your paving to make sure that it is thoroughly cleaned.